Top 9 3D Printer Cooling Blowers

0

We spent many hours on research to finding 3d printer cooling blowers, reading product features, product specifications for this guide. For those of you who wish to the best 3d printer cooling blowers, you should not miss this article. 3d printer cooling blowers coming in a variety of types but also different price range. The following is the top 9 3d printer cooling blowers by our suggestions

716 reviews analysed

1. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

Feature

2. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

3. RuiLing 4-Pack 5015 DC 12V 0.18A Cooling Blower Fan 6000Rpm Industrial Cooling Turbo Fan for 3D Printer Accessories,Mini Black Plastic Cooling Fans 50x50x15mm

RuiLing 4-Pack 5015 DC 12V 0.18A Cooling Blower Fan 6000Rpm Industrial Cooling Turbo Fan for 3D Printer Accessories,Mini Black Plastic Cooling Fans 50x50x15mm

Feature

Description

Item Package Quantity:4

Specification:
Model: 5015
Voltage: 12V
Color: Black
Power: 2.16W
Current: 0.18A
Noise: 25dB
Airflow: 18CFM
Speed: 6000Rpm
Bearings: Oil-bearing
Air inlet size: 31mm
Outlet size: 12.4 x 16.8mm
Dimensions: 50 x 50 x 15mm / 1.97 x 1.97 x 0.59″
Features:
High Quality:Stable performance, strong power, low noise, long service life.
Perfect for cooling heatsinks on hot ends, prints, or other cooling needs. Bearing is high precision, long life and low noise.

Package content:
4pcs Cooling Blower Fan

4. 3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

Feature

5. KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

Feature

Description

Specification:
Rated Voltage : DC24V 
Operation Voltage: DC10.8-13.2 
Consuming Current : 0.10A(0.12 Max.) 
Consuming Power: 1.2W(1.44 Max.) 
Connector: 2pin-ph2.5 
Rated Speed: 6200 PRM 
Iife Expectance: 50,000 hours at 25 degree 
Insulation Level: UL Class A 
Acoustic Noise: 27db
Max. Air Flow: 6.86CFM 
Rotation Direction: Clounter-clockwise 
DC Line Length : 290mm 
Size:40x40x10mm and 50x50x15mm

Product List:
2 x Cooling Fan 50x50x15mm
2 x Cooling Fan 40x40x10mm
2 x Fan Guards

KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to
support your work and design challenges from Home, School to Industrial applications!

6. Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder

Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder

Feature

Description

Size:A

Features:
DC 24V 0.1A operation voltage, fit for CR-8S Ender 3 3D printer extruder.
2Pin connector, wire length approx. 100cm / 39.4in.
Waterproof , dust-proof and super noise-reduced.
Easy installation and high-efficiency heat dissipation,
Extend the life of your 3D printer, best accessory for you.

Specification:
Volume: 4010
Compatibility: CR-8S/ Ender 3
Noise: 20dBA
Speed: 7600 r/min
Connector: 2Pin
Bearings: Oil-bearing
Cable Length: Approx. 100cm / 39.4in
Rated Power: DC 24V 0.1A
Item Body Size: 4 * 4 * 1cm / 1.6 * 1.6 * 0.4in
Item Weight: 16.5g / 0.6oz
Package Size: 13 * 9 * 1cm / 5.1 * 3.5 * 0.4in
Package Weight: 18.7g / 0.7oz

Package List:
1 * Blower Fan

 

7. MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

Feature

Description

Color:2pcs Brushless DC Cooling Fan

Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.

Specification:
Model: 4010 Blower Fun
Rated Voltage: DC12V
Operation Voltage: DC7V – 12V
Consuming Current: 0.08A+5%
Consuming Power: 0.96W
Max. Air Flow: 2.8CFM
Acoustic Noise: 22dBA
Rated Speed: 7200±5%RPM
Connector: 2pin-ph2.54
DC Line Length: 300mm
Rotation Direction: Clounter-clockwise
Life Expectance: 50,000 hours at 25 degree
Size: 40x40x10mm
Screw Hole Diameter: 1.5mm

Features:
1. Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
2. Improve life
3. Lubricating
4. Not easy to make noise

Polarity Protection:
1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged)
2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.

Package Including
2 * 4010 12V 0.08A Brushless DC Cooling Fan

8. 2pcs 5015 Dual Ball Bearing Cooling Blower Fan DC 24V 0.10A~0.15A with 2 Pin Connector 50mmx15mm Fans

2pcs 5015 Dual Ball Bearing Cooling Blower Fan DC 24V 0.10A~0.15A with 2 Pin Connector 50mmx15mm Fans

Feature

Description

Color:DC24V 2PCS

Product Name : Dual Ball Bearing Cooling Blower Fan;
Material : Plastic;
Main Color : Black ;
Rated Power : DC 24V 0.15A;
Connector : 2 Pin Terminals Power Connector
Total Size : 2″ x 2″ x 0.6 ” (L*D*H);Outlet Size : 0.8″ x 0.6″(L*W)
Cable Length : 20″;
Mounting Spacing : 2.3″
Weight : 30g;
Improve air flow, cool your CPU when in use, easy thermal heat dissipation, low noise, 2-Terminals power connector, easy to install.

Notice: This product of our company are non-waterproof product, it is strictly prohibited using in the water. Secondly, product operating voltage is DC24V, prohibit overload use. Product working environment is below zero 10 Degrees Celsius to 70 Degrees Celsius Fourthly, please do not dismantle the product privately.

Warranty 2 years.

9. HICTOP 3D Printer Turbo Fan Blower Fan 0.9M Wiring 12V DC 50mm x 15mm Cooling Fan 3D Printer Parts (2 Packs)

HICTOP 3D Printer Turbo Fan Blower Fan 0.9M Wiring 12V DC 50mm x 15mm Cooling Fan 3D Printer Parts (2 Packs)

Feature

Conclusion

By our suggestions above, we hope that you can found 3D Printer Cooling Blowers for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general