
We spent many hours on research to finding 550 motor cooling 7.4v fan for brushless, reading product features, product specifications for this guide. For those of you who wish to the best 550 motor cooling 7.4v fan for brushless, you should not miss this article. 550 motor cooling 7.4v fan for brushless coming in a variety of types but also different price range. The following is the top 10 550 motor cooling 7.4v fan for brushless by our suggestions
786 reviews analysed
1. GoolRC 540 13T Brushed Motor for 1/10 Traxxas Ford F-150 RC Car
Description
This GoolRC 540 13T brushed motor is designed to provide both quality and performance at an affordable price. The motor boasts some great features such as high power output, heatsink design, replaceable brushes, which will provide a longer running time.
Features:
High purity copper windings maximizes efficiency
Precision balanced rotor, smoothness for best reliability and maximum RPM
Precision engineered for maximum energy conversion
High strength magnets for unmatched brush-motor performance
Excellent torque and long-run times
Direct-solder wiring tabs for flexible soldering options
Dual-ball bearings design
Specifications:
Brand: GoolRC
Type: 540 13T
Max voltage: 8.4V
Idle current: 4.5A
RMP: 29000
Screw hole: 4 * M3
Shaft dia: 3.17mm
Shaft length: 12mm
Motor dia: 36mm
Motor length: 53mm
Package Information:
Package size: 10.5 * 8 * 6cm / 4.1 * 3.2 * 2.4in
Package weight: 196g / 6.9oz
Gift box package
Package List:
1 * GoolRC 540 13T Brushed Motor
2. Innovateking Motor Cooling Fan 28000RPM 8.5V 540 550 Motor Heat Dissipation Metal Cooling Fan RC Car Accessory for 540 550 Brushless Motor
Feature
- 1.Designed for RC model car 540 550 brushless motor. 100% brand new and quality guaranteed.
- 2.The speed can reach up to 28000RPM, perfect heat dissipation effect which can effectively prevent the motor from overheating.
- 3.Small size and lightweight than normal rc heatsink, convenient for you to install and remove.
- 4. With high quality material and exquisite workmanship, this cooling fan is durable for long-lasting performance.
- 5. Notice: Heat is the killer of electrical components especially motors, if you want the motors to perform better and last longer, it’s a must for you to get this aluminum RC motor heat sink. Please feel free to contact us if you have any issue or need further assistance, we are here for you.
Description
Crazepony Motor Cooling Fan 28000RPM 8.5V 540 550 Motor Heat Dissipation Metal Cooling Fan RC Car Accessory for 540 550 Brushless Motor
Features:
1. Small size and lightweight, convenient for you to install and remove.
2. With high quality material and exquisite workmanship, this cooling fan is durable for long term use.
3. Perfect heat dissipation effect which can effectively prevent the motor from overheating.
4. The speed can reach up to 28000RPM.
5. Designed for RC model car 540 brushless motor.
Specifications:
Condition: 100% Brand New
Item Type: RC Accessory
Material: Metal
Optional Color: Red + Black, Gold + Black
Size: 30 * 30 * 10mm / 1.18 * 1.18 * 0.39inch
Weight: Approx. 18g
Voltage: 5V-7.4V
Max. RPM: 28000
Cable Length: Approx. 18cm / 7.09inch
Note:
Please allow slight deviation for the color and measurement. Thanks for your understanding.
——————————————————–
Package Including
1 * Metal Cooling Fan for 540 550 Motors Gold+Black
3. ShareGoo Alloy Heat Sink Heatsink with 5V Cooling Fan for 1/10 Car 540 550 3650 Size Brushless Engine Motor,for Remote Control Car Truck Buggy Crawler
Feature
- For sale is high quality Aluminum Alloy Heatsink with 5V Cooling Fan in Blue Color.
- This heatsink fit for 540 and 3650 size motor, it will come with a 5V cooling fan, to protect your motor.
- Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos.
- This cooling fan can power up from the receiver spare port, very easy to use.
- Material: durable aluminum alloy and hard plastic.
Description
Features:
The item is a professional and practical heatsink, which is mainly made of durable aluminum alloy and suitable for 1/10 Car 540 550 3650 Size Motor.
Comes with a 5V cooling fan to well protect your motor. Besides, the cooling fan can power up from the receiver spare port,very easy to use.
Color:Blue
Material: Durable aluminum alloy and hard plastic.
Cooling fan size: about 30*30*10mm.
Suitable for 1/10 Car 540 550 3650 Size Motor.
Come with a 5V cooling fan to protect your motor.
The cooling fan can power up from the receiver, very easy to use.
Package Includes: (as picture shows)
1 x Alloy Heatsink with 5V Cooling Fan for 540 550 3650 Size Motor
Note:There are only 2 screws to fix the cooling fans,that is not missing screws.It can not install 4 screws due to design size of fans.Contact me if there is any problem with.
4. ShareGoo Alloy heat sink Heatsink with 5V Cooling Fan for 1/10 Car 540 550 3650 Size Brushless Engine Motor,For Remote Control Car Truck Buggy Crawler(Purple)
Feature
- For sale is high quality Aluminum Alloy Heatsink with 5V Cooling Fan in Purple Color.
- This heatsink fit for 540 and 3650 size motor, it will come with a 5V cooling fan, to protect your motor.
- Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos.
- This cooling fan can power up from the receiver spare port, very easy to use.
- Material: durable aluminum alloy and hard plastic.
Description
Features:
The item is a professional and practical heatsink, which is mainly made of durable aluminum alloy and suitable for 1/10 Car 540 550 3650 Size Motor.
Comes with a 5V cooling fan to well protect your motor. Besides, the cooling fan can power up from the receiver spare port,very easy to use.
Color:Purple
Material: Durable aluminum alloy and hard plastic.
Cooling fan size: about 30*30*10mm.
Suitable for 1/10 Car 540 550 3650 Size Motor.
Come with a 5V cooling fan to protect your motor.
The cooling fan can power up from the receiver, very easy to use.
Package Includes: (as picture shows)
1 x Alloy Heatsink with 5V Cooling Fan for 540 550 3650 Size Motor
Note:There are only 2 screws to fix the cooling fans,that is not missing screws.It can not install 4 screws due to design size of fans.Contact me if there is any problem with.
5. 38010201 Max10 SCT ESC Combo with 3660SL 4000kV Brushless Motor
Feature
- ESC: 1/10th scale sensor less Brushless
- cont./Peak current: 120A/830A
- input: 2-4S LiPo/6-12 Cells NiMH
- BEC output: switch mode: 6V/7.4V, 4A
- ESC: fan: yes
- programing via set button, LED program box, LCD program box, Wi-Fi module, fan/program port
- ESC: Size: 49.0×39.5×34.7mm
- Weight: 105g
- KV Rating/T Count: 2S LiPo:KV≤6000
- 3S LiPo:KV≤4000
- 4S LiPo:KV≤3000(36XX Series of Motors)
- Motor: Pole Count: 4
- KV Rating: 4000
- LiPo Cells: 2-3S
- O.D.(mm): 36(1.417in)
- Length (mm): 60(2.36in)
- Shaft Diameter (mm): 5(0.196in)
- Weight (g): 268(9.453oz)
- Applications: 1/10thShort-course Truck/truck/monster truck(4wd)
Description
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. The 4 pole design will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain. When pairing the EzRun 3652/3660 G2 with a Hobbywing EzRun MAX10-SCT or MAX10 ESC, the built-in temperature sensor and sensor port at the load end (for connecting to ESC) will make the motor thermal protection available to protect the motor from damage due to overheat.
6. Innovateking 3650 5200KV Sensorless Brushless Motor with 120A ESC Electronic Speed Controller and Programming Card Waterproof Combo Set 3.175mm Shaft for 1/10 RC Car
Feature
- Complete 3650 5200KV sensorless brushless motor with 120A ESC and programming card, no need for you to match different motors and ESCs anymore, save your time. Water-proof and dust-proof for all weather races (Note: Please uninstall the cooling fan before using the ESC in water
- clean and dry it soon after the use for avoiding the connectors get rusty).
- Specially designed for RC car with excellent start-up,acceleration and linearity features.The strong resistant current capability, excellent heat dissipation.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery/Over-heat protection/throttle signal loss protection/motor blocked protection,Easily programmed and compatible with pocket-sized program card.
- 4 Pole 12 Slot Hi-torque motor design, high purity copper windings maximizes efficiency, high RPM ABE C5 oversize bearings, stator-super Thin (0.35 mm) lamination.
- Universal fits all 1/10 brushless cars-multi-mounting system for M3 screws, removable/replaceable Rotor, precision engineered for maximum energy conversion. 100% brand new and quality guaranteed, please feel free to contact us if you have any issue or need further assistance.
Description
3650 5200KV Sensorless Brushless Motor with 120A ESC Electronic Speed Controller and Programming Card Waterproof Combo Set 3.175mm Shaft for 1/10 RC Car
Specifications of Motors:
Size: 3650
KV: 5200
Watts: 900W
Max voltage: <9.6V
Max Amps: 94A
KV(RPM/Volt): 5200KV
Max RPM: 50000
Diameter: 36mm
Length: 50mm
Shaft length: 15mm
Shaft diameter: 3.175mm
Connector: 4.0mm gold
Mounting Hole: M3
Waterproof: Yes
Weight: 180g
Package size: 110*70*45mm
Package weight: 218g
Note:
Although this combo suitable for most 1/10 1:10 RC car/truck, please check the size especially the
mounting holes of the motor before purchase.
Specifications of RC Programming Card:
This program box is used to program the brushless ESC
Suitable esc: 25A, 35A, 45A, 60A, 80A, 120A ESC
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car
Size: 80x60x4mm(3.15×2.36×0.16inch)
Working voltage/currren: 5-6.5V/100mAh
Hello friend, please feel free to contact us if you have any issue or need further assistance, we are here for you.
7. GoolRC RC Car Motor Heatsink Cooling Fan with Thermal Sensor CNC Aluminum Alloy Clamp Heatsink for 4268 4274 Motors 1/8 1/10 Buggy Cars (Silver)
Feature
- This RC motor heat sink is specially designed for 4268-4274 motors of RC model car.
- The RC heat sink with thermal sensor is equipped with 5-10V cooling fan to protect your motor.
- The thermal sensor will accurately detect rising temperature, when the motor is up to 40℃, the cooling fan will automatically turn on to cool the motor.
- The cooling fan can be powered up from the receiver, convenient and easy to use.
- High quality material designed clamp shape and exquisite workmanship, the heatsink is durable for long term use.
Description
Features:
This RC motor heat sink is specially designed for 4268-4274 motors of RC model car.
The RC heat sink with thermal sensor is equipped with 5-10V cooling fan to protect your motor.
The thermal sensor will accurately detect rising temperature, when the motor is up to 40℃, the cooling fan will automatically turn on to cool the motor.
The cooling fan can be powered up from the receiver, convenient and easy to use.
High quality material designed clamp shape and exquisite workmanship, the heatsink is durable for long term use.
Specifications:
Item name: Heatsink Cooling Fan with Thermal Sensor
Color: Silver
Fan input: 5-10V
Fan size: 40 * 40mm
Clamp suitable for: 4268-4274 Motors
Weight: 29g
Package Information:
Package size: 8 * 7 * 5cm / 3.2 * 2.8 * 2in
Package weight: 31g
There might be some deviation due to manual measurement.
Package List:
1 * Heatsink Cooling Fan with Thermal Sensor
8. RC Car Motor Heatsink Cooling Fan with Thermal Sensor CNC Aluminum Alloy Clamp Heatsink for 4268 4274 Motors 1/8 1/10 Buggy Cars
Feature
- This RC motor heat sink is specially designed for 4268-4274 motors of RC model car.
- The RC heat sink with thermal sensor is equipped with 5-10V cooling fan to protect your motor.
- The thermal sensor will accurately detect rising temperature, when the motor is up to 40℃, the cooling fan will automatically turn on to cool the motor.
- The cooling fan can be powered up from the receiver, convenient and easy to use.
- With high quality material designed clamp shape and exquisite workmanship, the heatsink is durable for long term use.
Description
RC Car Motor Heatsink Cooling Fan with Thermal Sensor CNC Aluminum Alloy Heatsink for 4268 4274 Motors 1/8 1/10 Buggy Cars.
Specifications:
Item name: Heatsink Cooling Fan with Thermal Sensor
Color: Silver
Fan input: 5-10V
Fan size: 40 * 40mm
Clamp suitable for: 4268-4274 Motors
Weight: 29g
Package information:
Package size: 8 * 7 * 5cm / 3.2 * 2.8 * 2in
Package weight: 31g
There might be some deviation due to manual measurement.
Package list:
1 * Heatsink Cooling Fan with Thermal Sensor
9. Hobbywing 90010000 12T/2030 7800kV 1/18th Scale Sensor Less Brushless Motor
Description
This is the Hobby wing 12T/2030 (7800Kv) 1/18th Scale Sensor less brushless Motor Optimized for 1/18 scale cars.
10. Surpass Hobby 2 Cooling Fan Motor Heat Sink System RC Motor Fan for 1/10 HSP RC Car Motor
Feature
- Surpass Hobby 5V C4 Cooling Fan
- Material: durable aluminum alloy and hard plastic.
- Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos.
- This cooling fan can power up from the receiver spare port, very easy to use.
- For sale is high quality Aluminum Alloy Heatsink with 5V Cooling Fan
Description
SurpassHobby Motor Heat Sink With Two Cooling Fans for 1/10 HSP RC Car Motor
Feature:
Made from high quality aluminium and plastic
For 1/10 RC racing car, 36mm diameter motor
Two cooling fans protect the motor from overheating efficiently
100 New and good quality
Easy to install Specifications:
Operating voltage: DC 5V 0.15A
Material: aluminium
Suit for 1/10 HSP RC Car 540/550 3650 Motor
Color: blue, red, orange optional
Inside diameter: 34mm
Weight: approx. 39g
Package includes:1 x Coling Fan
Conclusion
By our suggestions above, we hope that you can found 550 Motor Cooling 74V Fan For Brushless for you.Please don’t forget to share your experience by comment in this post. Thank you!