Top 10 Incubator Heating Cooling
We spent many hours on research to finding incubator heating cooling, reading product features, product specifications for this guide. For those of you who wish to the best incubator heating cooling, you should not miss this article. incubator heating cooling coming in a variety of types but also different price range. The following is the top 10 incubator heating cooling by our suggestions
834 reviews analysed
1. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
2. Pet Fit For Life Snuggle Soft Cooling and Microwave Heating Gel Pad Safe for Cats, Dogs and All Pets
- ★ ANOTHER GREAT NEW PRODUCT FROM PET FIT FOR LIFE – **Over 250 Snuggle Soft Purchased by the ASPCA to help keep shelter pets comfortable** You asked us to create a soft, dual purpose heating/cooling pad and that’s just what we did. Thanks to all our customers for helping us create this great new soft (not hard like the competition) gel pad. Keep your pet cool in the summer time and warm in the winter. This dual-purpose gel pad is the perfect size for any pet.
- ★ SOFT FLEECE COVER – It’s so soft your pet will lie on it just because it is so comfortable. Unlike other pet warmers/coolers, the Cuddle Soft is filled with nontoxic gel which makes it just like lying on a pillow. It’s so comfy for your dog or cat. This dual-purpose gel pad is the perfect size for any pet. Your cat or dog can lie directly on it or you can insert it inside their own bed cover.
- ★ HEAT IT UP or COOL IT DOWN – The Cuddle Soft Heating/Cooling Pad is so simple to use and provides hours of soothing warmth or cooling relief for your pet. Heat in the microwave for 30 second intervals until desired temperature is reached. or cool it in the refrigerator. It’s that simple!
- ★ SIMPLE TO CLEAN – The fleece cover is secured with velcro and can easily be removed and thrown in the washer to keep it clean year after year. Clean the gel pad (if necessary) with a damp cloth and a little soap and water.
- ★ A NOTE TO OUR CURRENT AND POTENTIAL CUSTOMERS – When used properly, the Cuddle Soft Pet Heating and Cooling Pad is a great alternative to wires and electricity for keeping your pets warm in the winter and cool in the summer. FOLLOW THE INSTRUCTIONS, your pets’ comfort is well worth the small amount of effort required to properly heat or cool the pet pad. PET FIT FOR LIFE – The most trusted name in pet supplies on Amazon. 100% customer satisfaction, money back guarantee!
3. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
4. KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles
- DUAL RELAY OUTPUT AND TWO TEMPERATURE SETPOINT. Can be connected with refrigeration and heating equipment at the same time. One setpoint for heating and one for cooling. Automatic conversion of cooling and heating. Maximum output load 1100W ( 110V)
- BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
- GREAT SENSOR WITH HIGH SENSITIVITY UNDER 1℉ ACCURACY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping, for reducing accumulated temperature error after equipment stopped. The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
- SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
- USEFUL ADDITIONAL FUNCTIONS. Temperature calibration, cooling delayed, over-temperature and sensor fault alarm. To avoid displaying the wrong temperature, refrigerator damaged and temperature exceeded.
5. Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
6. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
7. BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W
- ✓ DUAL OUTLET, DUAL FUNCTIONALITY: Our controller is capable of controlling a heating and cooling device simultaneously
- ✓ SET AND GO: Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ PROFESSIONAL GRADE: High-accuracy waterproof temperature probe with working temperature from -58 to 230°F
- Controller with working temperature from -40 to 176°F
- ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
- ✓ SAFE & RELIABLE: Our thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 120VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5
BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W
8. Inkbird Thermostat ITC608T Dual Temperature Probe Temperature Controller Pre Wired AC Dual Stage Cooling Heating Outlet 12 Period Timer Stage 120V 15A 1800W 2 Temp Sensors Reptile Incubator Brewing
- Two temperature probes can be insert into P1 and P2 interface. Temperature senor is waterproof.
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃). Max Loading: 120V 15A 1800W.
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Warranty: 2 years
1x ITC-608T Temperature Controller
2x Temperature Sensors
9. Benchmark Scientific H2200-HC MyTemp Mini Digital Incubator with Heating and Cooling, 115V
10. OrangeA Black Reptile Egg Incubator 23L Capacity Mini Digital Incubator ReptiPro 6000 Portable Reptile Incubator Cabinet Style with Heating and Cooling 5-60°C 12V/110V Work for Small Reptiles
- ✔【DIGITAL TEMPERATURE CONTROL】- Temperature can be adjusted from 5°C to 60°C (36-140°F), providing a constant temperature incubation environment.
- ✔【BRIGHT LED DIGITAL DISPLAY】- Current chamber temperature is displayed on the LED digital display.
- ✔【LARGE CAPACITY & PORTABLE】- Having a roomy 23L chamber volume and with a built-in handle, the incubator is easy to move around.
- ✔【CONVENIENT & DURABLE】- The power switch is located on the incubator and can be turned on or off during incubation. Visible glass door for you to view the incubation conditions without affecting the incubation process.
- ✔【WIDELY USE】- Incubator can be used as an incubator to transport reptiles or amphibians
- it is the best choice for transporting animals that require constant temperature.
23L Scientific Lab Incubator For Small Reptiles
This incubator functions as both a cooler and a warmer using a thermoelectric system. Its interior volume is 23L and can accept bottles and flasks up to 2L. Two removable shelves create 3 platforms. The desired temperature is set on the digital LED display, and the incubator immediately starts heating or cooling, while accurately monitoring the temperature inside and displaying it on the LED panel.
- Digital Temperature Control
- Bright LED Digital Display
- Large Capacity & Portable
- Convenient & Durable
5 °C-60 °C Constant Temperature
Can heat samples to 60 °C, cool down to 5 °C. Within each shelf, the temperature only fluctuates by 2-3 °C.
LED Digital Display
The current chamber temperature is displayed on the LED panel and it can accurately monitor the temperature inside. Temperature set in increments of 1 °C.
23L Large Capacity
The scientific lab incubator features 23L large internal chambers, capable of storing flasks and bottles up to 2 liters. With a portable handle, the incubator is easy to move around.
Two-layer Sliding Compartment
The incubators include two adjustable/ removable shelves for increased capacity. If kept on the same shelf, temperature fluctuations of 0.5°C.
Visible Glass Door
With a visible door, you can easily view the incubation conditions without affecting the incubation process.
The incubator can be used as an incubator to transport reptiles or amphibians.
- Voltage: 110V AC,12V DC
Cooling Power: 50W DC Heating Power: 40W DC
Internal specification: 23.9×27×37 cm(9.4×10.6×14.6 inch) External specification: 41.7×34×47.7 cm(16.4×13.4×18.8 inch)
By our suggestions above, we hope that you can found Incubator Heating Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!