689 reviews analysed
1. Spectre Performance 5946 Chrome 90 Degree Fuel Fitting
The Spectre 90 Degree Chrome Fuel Hose Fitting features a 3/8 inch national pipe thread and a 3/8 inch hose barb joined through a 90 degree elbow. Manufactured using high quality materials, this triple chrome plated hose fitting is engineered for optimum fit and function.
2. Spectre Performance 8711 Vacuum Sensor Adapter Kit
Spectre’s Vacuum/Sensor Adapter Kit attaches vacuum lines almost anywhere on the intake tube. This kit includes (2) hole saws, (6) grommets and (10) fittings to fit all popular vacuum line and air sensors and is for use with Spectre’s modular intake systems where vacuum hoses are required. All Spectre’s air intake components are designed and built using high quality materials and engineered for optimum fit and function.
3. Dorman 47380 Vacuum Connector Value Pack, 65 Piece
4. PoolSupplyTown Free Rotation Pool Vacuum Vac Lock Safety Wall Fitting for Suction Pool Cleaner Replaces Hayward W400BWHP & Pentair GW9530
The Vacuum / Vac Lock is a safety mechanism designed with a spring action cover which holds the pool cleaner hose in place and will snap close the suction fitting automatically when not in use. It can be used with all suction pool cleaners such as the Hayward Pool Vac, Navigator, Baracuda, Kreepy Krauly and many other suction pool cleaners. ***Installation instruction: 1. Add silicone sealant to 1 1/2″ male threads and hand turn into 1 1/2″ female thread wall fitting already installed in the pool. This fitting will be connected to the suction side of the plumbing system with a 3-away or ball valve at the equipment to adjust the flow rate. 2. Thread into wall fitting as far as you can AND with the “arrow marking” pointing up. the spring will be on top. 3. Anchor set screw. 4. Use screwdriver to open flap and then insert vacuum/pool cleaner hose. “Clip” inside flap will help hold vacuum/pool cleaner hose to wall fitting when pump is turned off. 5. When not in use make sure cover flap has been snapped firmly in place. 6. NEVER operate a pool/spa with an uncovered suction outlet or vacuum port.***
5. Dorman Help! 41050 Vacuum Cap Asst
6. Aluminum Alloy Vacuum Manifold Kits 6 Port 1/8 NPT Turbo Wastegate Boost Block Intake Manifold Universal Modification Accessory
Great to tie in Boost Controllers, Gauges and any components that require a separate vacuum source. You can also use them for fuel and oil requirements with tape. Billet vacuum manifold kit is a great add-on for tuner that require additional vacuum sources. It has 6 ports, and also comes with plug if tuner don’t require that many ports. This will ease up all the trouble for splitting up lines and making extra ports if needed.
Made of high quality aluminum alloy.
The surface is anodized for a long lasting, brilliant finish.
Includes six 1/8″ vacuum ports.
Includes two 3/8″ inlet-outlet fittings.
With 4 block-off plugs.
With 1 inlet-outlet block-off plug.
With mounting hardware.
A perfect modification accessory.
Material: aluminum alloy
Color: black, red, blue (optional)
Size: check on our pictures
Fitment: universal (please check the installation size before buying)
Package Size: 21 * 17 * 3cm / 8.3 * 6.7 * 1.2in
Package Weight: 364g / 13oz
1 * Vacuum Manifold Kits
7. Intex Small Pool Strainer Connector Set 2 Inlets 1 Directional 3 Black Plugs
- Intex 1.25 in. Small Pool Strainer Connector 2 inlet & 1 Outlet 3 Black Plugs
- Replace your Intex 15′ and smaller Pool Strainers, requires 1.25″ inside diameter clamp-on hoses to use
- Works with the Intex 530 and 1000 gallon per hour filtration pumps
- For Intex pools that use the 1-1/4″ clamp on filter connection hoses
- Geniune Intex Parts 25022E.
8. Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8" Barb x 3/8" Male Pipe
- 90-degree elbow for connecting hose to threaded pipe at an angle
- Fitting connects to hose on one end and has an NPT male connector on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)
- For use with plastic or rubber hose
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
This Anderson Metals hose fitting is made of brass and has a 90-degree elbow shape for connecting hose to threaded pipe conforming to the National Pipe Thread (NPT) standard at an angle. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT connector on the other end connects to threaded pipe. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
9. Intake Manifold Heater Hose Stainless Steel Fitting For Chevy 1/2 Npt 5/8 Barb
- Heater hose is made of metal, which ensures that it has good anti-rust, anti-corrosion,not easy to deform,good ductility,durable and practical.
- Made by professional manufacturer,original standard,repair easily,direct replacement for your old or broken one.
- It can be installed successfully with a simple operation and it is very easy to install.
- Intake Manifold,water pump or heater hose fitting.
- Fitment: 1/2inch Npt To 5/8inch Barb Hose
1/2inch Npt To 5/8inch Barb Hose
Fits Most Engines Including
For G M (Chevy, For G M C, Oldsmobile, For Pontiac, For Cadillac, Buick, For Fo Rd, And Mopar (Chrysler, Dodge, For Plymouth)
Fits 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351w 347 352 360 390 406 427 428 429 460 351c 351m 400m 273 318 340 360 361 383 400 413 426w 440 455 330 326 Cui Engines
1 * Threaded Joint
By our suggestions above, we hope that you can found Intake Vacuum Fitting for you.Please don’t forget to share your experience by comment in this post. Thank you!