Nowadays, there are so many products of peltier module cooling in the market and you are wondering to choose a best one.You have searched for peltier module cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings peltier module cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
933 reviews analysed
1. ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706
- 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
- 2. Structure: Complete sealed structure, isolating the moisture in the air.
- 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
- 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge.
- 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
Great idea for pet cooling in hot summer, such as chicken, little dog. Can used for plate cooling, pet bed cooling, test bench, small space cooling.
-Power Supply: DC 12V
-Power Cnsumption: 72W
-Size: Approx. 120 * 100 * 80mm / 4.7 * 3.9 * 3.1inch
1 x Cooling System Kit
2. Northbear Thermoelectric Peltier Refrigeration Cooling Cooler Fan System Heatsink Kit Cooler (2 Fan)
- This module installation is assembled and you do not need to use your hands
- Cooling power: 72W
- Power: 12VDC 6A (not include in this Kit)
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques
- Tips: cold end frost require ambient temperature is low, is not what the environment can be frost, frost general ambient temperature below 25 degrees
- A medium sized humidor basically for seasoning. With a temp controller, this keeps the inside of the humidor
Product Name: Thermoelectric Peltier Refrigeration Cooling System Kit Cooler
Power: 12VDC 6A (not include in this Kit)
Main color: silver
3. Adafruit 1335 Peltier Thermoelectric Cooler Module with Heat Sink Assembly, 12 Volt, 5 Amp
4. 12V 12A Thermoelectric Peltier Refrigeration Cooling System Semiconductor Refrigeration Cooler DIY Kit Mini Air Conditioner Fridge
5. diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
6. Laqiya 5PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
100% Brand new and high quality
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous
applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
Size: Approx. 40mm x 40mm x 3.8mm
Cooling power: Qcmax 60W
Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: Approx. 25-30CM
These devices must be used in conjunction with a heat sink to avoid burned
Each device is full inspected and tested
Fitted with 6-inch insulated leads
5 x TEC1-12706 Thermoelectric Cooler
7. ESUMIC 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 60W 5.8A
- 1. Model: TEC1-12706. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Performance:Each device is full and inspected tested. Easy to install and use.
- 3. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 4. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
– Model: TEC1-12706
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 60W
– Imax (A): 5.8A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
10PCS x TEC1-12706 Thermoelectric Cooler
8. Lheng Semiconductor Refrigeration Tablets TEC1-12710 12V 10A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
- Rated voltage: DC12V (Vmax: 15.5V) Size: 40mm X 40mm X 3.6mm
- Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous
- Testing which side is hot without heat sink can be done by connecting +12V or less and disconnect very fast in less then 2 seconds otherwise, the tile will be burnt inside
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques
It can be used in CUP’s/ Picnic cooler/ Drinks coolers/ Ice boxes/ Laser diodes/ CCD cameras and others. Note: heat side requires heat sink all the time One piece of 12705 tiles are packed in this package Voltage(V): 12V Umax(V):15.4V Imax (A): 4A QMax(W): 77W Size: 40mm X 40mm X 3.6mm Can be used in refrigerator,Portable cooling car box,Liquid Cooling,Temperature stabilizer etc.
By our suggestions above, we hope that you can found Peltier Module Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!